|
|
Post by 99tahoe on Mar 30, 2018 14:26:30 GMT -5
hello I have a 3 inch clutch that I want to put on one of my xl saws have the shoes / drum outer plate just don't have the springs does anybody know what the part number might be or maybe someone has a set they want to get rid of thanks |
|
|
|
Post by sweepleader on Mar 30, 2018 15:05:59 GMT -5
What is the clutch from? Get the IPL for that saw and see what the part number for the springs is that you are looking for.
|
|
|
|
Post by 99tahoe on Mar 30, 2018 15:50:01 GMT -5
the clutch is from a xl 123 I believe I went on leons site but it does not tell me the dia of the clutch I know the xl 101 etc had i think a 2 3/4 clutch but this one is 3 inch  |
|
|
|
Post by sweepleader on Mar 30, 2018 15:53:57 GMT -5
Leon will be by, he will know what springs you need or PM him directly.
|
|
|
|
Post by stillsawing on Mar 30, 2018 17:16:09 GMT -5
I have the same 3" clutch in my 350, the IPL shows part number 63977 for the springs.
|
|
|
|
Post by onlyhomelites on Mar 31, 2018 0:06:28 GMT -5
That clutch doesn't look quite right to be the A-69459; the shoes are too "long". It looks more like an XL-800 setup. Is the backplate a true 3" or closer to 3 1/8"?
|
|
|
|
Post by 99tahoe on Mar 31, 2018 13:50:25 GMT -5
the plate is 2 13/16
|
|
|
|
Post by onlyhomelites on Apr 1, 2018 7:35:43 GMT -5
Here's pics of the A-69459 clutch from an XL-123.   I've gone back through my old image files of the clutch plates and the only on that looks like the clutch that you posted is the 63053-*, which was used on some C-series, XL-700 to XL-800, XL-12's, etc... Almost all of Homelite's clutchs have divisions between the clutch shoes that are cast into the backplate. The 63053-* is unique as it offers full radius clutch shoes. There's two different types; they look the same but one is threaded for inboard operation and one for outboard. I measured one of mine on-hand at about 2 7/8". That was another unique part of this setup: the clutch shoes rode about 1/8" above the edge of the backplate. I honestly don't know what clutch you have, but if I was guessing based on what I know, it's a 63053 backplate with 63052 clutch shoes that are very worn, especially the one at the top of your pic. If I am right in that guess, you would need 63034 or 65842 clutch springs. |
|
|
|
Post by 99tahoe on Apr 1, 2018 16:40:44 GMT -5
thanks would that be used on a xl 113 also ? the one in the picture you posted
|
|
|
|
Post by onlyhomelites on Apr 1, 2018 22:55:35 GMT -5
Yes it would fit perfectly.
|
|
|
|
Post by sweepleader on Apr 4, 2018 6:56:34 GMT -5
|
|
|
|
Post by onlyhomelites on Apr 4, 2018 7:48:18 GMT -5
Thanks for closing the loop Dan, I hadn't made it to that yet!
|
|
|
|
Post by stillsawing on Apr 4, 2018 20:59:58 GMT -5
In my haste, I didn't see the difference between the two photos of the two clutches. Thanks to those that have made the correct information available for 99tahoe. I will double check myself in the future. 99tahoe, hope you have solved your problem.
|
|
