Some more detailed info about using the Husky modules and links for researching the mods.
UPDATED Nov 2021
Here is some info notes I saved where I used a $15 Anzac module to replace the blue coil of death with good results on a Homie EZ. You will need to install the Anzac coil onto your Wico/Prestolite laminations.
HOMELITE BLUE COIL OF DEATH MODIFICATIONS 1/2021
I stumbled across this POSSIBLE $12-$16 Blue coil of Death mod for the Homie EZ that use the Wico/Prestolite ELECTRONIC ignition system.
I HAVE TRIED THIS and it gets a good strong easy start operation. JUST PASSING ALONG SOME INFO that I stumbled across while looking for a module that will fit onto the Blue coil module core laminations for testing a failed Homelite EZ electronic Wico/prestolite ignition module on a EZ chainsaw.
UPDATE to notes: I have tried the Anzac mag mod with very good results.
Some say: We have used Husqvarna modules and even Stihl 1300 modules on older saws. Stihl part number for module 0000 400 1300 and the Anzac part number is listed below.
Update to notes. The Anzac module is more user friendly to do the mod as compared to the Stihl module. The Anzac Husky module is easier to get of of it’s core as compared to the Stihl module.
Homelite electronic ignition Wico/ Prestolite Blue coil of death replacement. 1/2021
Anzac 503901401 Ignition Coil Module for Husna 50 51 55 61 254 257 261 262 266 268 272 Chainsaw Jonsered 2054 EPA 2055 2095
Tested this as a good run, 1 2021
A replacement MODULE for Blue coil of Death A94111
Links tips to the mods
Using a ANZAC module from the link below: 1/2021
houseofhomelite.proboards.com/thread/6319/dollars-minutes-cure-prestolite-bluesAnzac 503901401 Ignition Coil Module for Husna 50 51 55 61 254 257 261 262 266 268 272 Chainsaw Jonsered 2054 EPA 2055 2095
Another guy trying the mod:
houseofhomelite.proboards.com/thread/10007/aftermarket-husky-question-prestolite-conversionThe North pole magnet MUST enter this module legs first on the Wico electronic Module.