|
|
Post by trailrider098 on Apr 9, 2020 16:48:11 GMT -5
Hey guys, first post, so much great info here. I restored a model 17 a while ago and finally found a nice 28” brush clearing bar for it. I’m upgrading from a 26” solid bar but now I need a new chain and was hoping someone would know where to find one. 28”, .063
|
|
|
|
Post by sweepleader on Apr 9, 2020 18:25:34 GMT -5
Hey, welcome to the House of Homelite!
Pictures of that saw!
The number of drive links would be needed, or bar numbers, to figure out a chain. The bar numbers might tell directly or they might be non-decipherable. Someone here will have the straight information. There are lots of sources if you know the number of drive links.
|
|
|
|
Post by undee70ss on Apr 9, 2020 22:07:51 GMT -5
Hey guys, first post, so much great info here. I restored a model 17 a while ago and finally found a nice 28” brush clearing bar for it. I’m upgrading from a 26” solid bar but now I need a new chain and was hoping someone would know where to find one. 28”, .063 What pitch chain? |
|
|
|
Post by 5terrysupersaws on Apr 9, 2020 23:10:55 GMT -5
Model 17 clearing bar (A-55379) , would take 28" #10 chain (AA-73342)
#10 chain = 10AC-(Chipper) or 10AL-(Chisel) , 1/2" pitch , .063" gauge .
|
|
|
|
Post by trailrider098 on Apr 10, 2020 13:31:39 GMT -5
Model 17 clearing bar (A-55379) , would take 28" #10 chain (AA-73342) #10 chain = 10AC-(Chipper) or 10AL-(Chisel) , 1/2" pitch , .063" gauge . Thank you!!!! Now to look that up and find one. Maybe cause I’m new but I can not post any pictures yet |
|
