|
Post by powerhomelite900g on Jan 25, 2020 7:46:15 GMT -5
Hii friends, I'm finally done with the nerve-racking rebuild of my Homelite 909g. I stored the saw completely, sealed it, etc. I cut out all the seals myself ...
The only thing I'm missing now is the exhaust .. A jet is currently quiet against the saw :-D
I hope you can help me...
best regards
|
|
bit
Collector
Posts: 96
|
Post by bit on Jan 25, 2020 8:06:15 GMT -5
Any pics? We'd love to see it!
What exhaust parts are you missing?
|
|
|
Post by powerhomelite900g on Jan 25, 2020 10:44:49 GMT -5
Is it a bit too complicated for me to upload pictures here :/ I actually only miss the element that you clamp into the exhaust ... I have the raw exhaust itself as well as the curved cap that leads the exhaust gases out to the side
|
|
|
Post by onlyhomelites on Jan 25, 2020 12:06:01 GMT -5
|
|
|
Post by powerhomelite900g on Jan 25, 2020 12:35:26 GMT -5
Leon we do that, but I have to say that I didn't paint the saw ... So please don't expect a beauty;) I'm currently waiting for my 40 inch bar with a new chipper chain. This should come in the next weeks! Then Leon gets the pictures from me, I promise! (I will also clean her)
Leon do you know if the elements you sent me fit on my saw? The number is not correct to the original parts-list. Thank you for your help!
|
|
|
Post by onlyhomelites on Jan 25, 2020 18:49:15 GMT -5
Crap! I forgot that the 900 series had their own. The A-56068 is close, but it won't cover the opening properly.
If I come across the proper A-57598, I'll let you know!
|
|
|
Post by powerhomelite900g on Jan 26, 2020 0:44:09 GMT -5
Yes that's right, I was annoyed with it :-D Part 56068 already lying around at home (to small)
|
|