|
Post by jclark on Aug 8, 2019 19:13:13 GMT -5
Does anyone have any suggestions on how to re-attach a peeling decal? I have a Super XL Big Red and some of the decals are starting to roll up. The decals feel like foil. They are in tact but the edges are starting to roll up. I'm looking for suggestions on the best way to re-attach them.
|
|
|
Post by Clasec on Aug 8, 2019 19:41:01 GMT -5
I've used 3M emblem adhesive. Can get messy if too much is used.
|
|
|
Post by sweepleader on Aug 8, 2019 21:21:02 GMT -5
3M Super Weather Strip Adhesive works too, auto parts store. It is also a contact adhesive so you only need a little on both sides, and be ready to lay it down correctly the first time. You will not get a second chance.
|
|
|
Post by blythkd on Aug 8, 2019 21:47:25 GMT -5
3M Super Weather Strip Adhesive works too, auto parts store. It is also a contact adhesive so you only need a little on both sides, and be ready to lay it down correctly the first time. You will not get a second chance. Yip, good stuff. Or contact cement is about the same thing if you have it. It's just not as yellow as the 3M.
|
|
|
Post by jclark on Aug 8, 2019 21:54:49 GMT -5
Sounds like the 3M stuff is the way to go. I'll give that a try.
Thanks for the advice
|
|