|
Post by Jarhead ☠ on Jul 25, 2019 8:21:45 GMT -5
Hello group, can anyone point me to a MD carb kit, maybe Joe?
|
|
|
Post by edju1958 on Jul 25, 2019 8:35:40 GMT -5
If Joe doesn't have one Bob Johnson may have one. Ed
|
|
|
Post by Jarhead ☠ on Jul 25, 2019 8:37:29 GMT -5
Thanks for the information, I'll be honest I'm a bit nervous tearing down this one. A little out of my wheelhouse!
|
|
|
Post by edju1958 on Jul 25, 2019 8:48:08 GMT -5
Actually this one should be fairly easy as compared to the more modern saws that Homelite made.There weren't all kinds of bells & whistles on the 1st gas powered saws,& the carb should be a piece of cake since it's kinda like one on a 4 stroke engine with the old style float carb.The difficult part might be in finding any parts you might need. Ed
|
|
|
Post by Jarhead ☠ on Jul 25, 2019 16:46:42 GMT -5
I rebuilt the carb with the old stuff and it runs, just leaks fuel from the H needle. I'll probably make a new gasket and I have a ton of o rings, I also have plenty of Tillotson gaskets for the manifold. I also found that someone put their initials in a hidden place in case it was stolen.
|
|