|
|
Post by sydney2904 on Jun 21, 2019 10:31:44 GMT -5
I am looking for 5 NOS part# 67510 outside bar guide plates. Chainsawlady please check your inventory or any other possible supplier. Thank you for your help. |
|
|
|
Post by undee70ss on Jun 23, 2019 20:07:08 GMT -5
67510 was superseded to 70618 GB shim kit, which consists of 70399 and 70400. These are common plates for many models, XL12, SXL, SXL925 ect...  |
|
|
|
Post by chainsawlady on Jun 25, 2019 8:01:03 GMT -5
sydney2904
There has been several changes on the bar plates on Homelite saws. If you can give me a little more information about the saw you want this bar plate for, I may be able to get the right one. On the early Homelites the plate had 5/16x8 studs. Later Homelites had 3/8x16 studs, so they have a larger holes in the plate. I have a used one for either size. Price is $1.70 plus shipping. Shipping would be over $3.00.If still interested, let me know what size you think you need.
joycewilson26@gmail.com
|
|
|
|
Post by sweepleader on Jun 25, 2019 20:38:22 GMT -5
The older studs are 5/16x18, slight typo there.
|
|
|
|
Post by jerseyhighlander on Jun 25, 2019 22:55:20 GMT -5
The older studs are 5/16x18, slight typo there. It's late now, it's been a long day week month several years... I did a double take on that like three times and it just wouldn't register. |
|
|
|
Post by chainsawlady on Jun 26, 2019 3:59:38 GMT -5
I'm sorry for the error on the size of stud for earlier Homelite saws. I am quite susceptible to
making errors at this time. Due to age and family problems, I apologize . Appreciate any help along the way.
chhainsawlady
|
|
|
|
Post by sydney2904 on Jun 26, 2019 10:30:00 GMT -5
Mrs. Wilson, I sent you an email describing the bar plate and some other questions to your email address joycewilson26@gmail.com. If you did not receive it, let me know and I will post it on here. |
|
|
|
Post by jerseyhighlander on Jun 27, 2019 1:05:15 GMT -5
I'm sorry for the error on the size of stud for earlier Homelite saws. I am quite susceptible to making errors at this time. Due to age and family problems, I apologize . Appreciate any help along the way. chhainsawlady No apologies Joyce. I was just making light of my own inability to reconcile what my eyes were seeing and what my brain wasn't registering.
Hope you're taking care of yourself.
|
|
|
|
Post by sydney2904 on Jun 27, 2019 19:49:27 GMT -5
sydney2904 There has been several changes on the bar plates on Homelite saws. If you can give me a little more information about the saw you want this bar plate for, I may be able to get the right one. On the early Homelites the plate had 5/16x8 studs. Later Homelites had 3/8x16 studs, so they have a larger holes in the plate. I have a used one for either size. Price is $1.70 plus shipping. Shipping would be over $3.00.If still interested, let me know what size you think you need. joycewilson26@gmail.com I need the 67510 with 3/8" Holes. Please ship the five with 3/8' HOLES. Thank you
|
|
