|
|
Post by edju1958 on Jun 6, 2019 21:49:13 GMT -5
Has anyone used a slide hammer to pull crank seals?I've seen a couple on Ebay & the screw on the end is way too big for using on chainsaws.Possibly one can be modified somehow? Ed
|
|
|
|
Post by Clasec on Jun 6, 2019 21:52:15 GMT -5
Has anyone used a slide hammer to pull crank seals?I've seen a couple on Ebay & the screw on the end is way too big for using on chainsaws.Possibly one can be modified somehow? Ed
Might look into a small body work slide hammer. Some are designed to hold a screw |
|
|
|
Post by edju1958 on Jun 6, 2019 21:54:45 GMT -5
Has anyone used a slide hammer to pull crank seals?I've seen a couple on Ebay & the screw on the end is way too big for using on chainsaws.Possibly one can be modified somehow? Ed
Might look into a small body work slide hammer. Some are designed to hold a screw Thanks Charles! |
|
|
|
Post by jklw77 on Jun 6, 2019 23:27:06 GMT -5
Classic had it ,a small body slide hammer with a screw attachment on it ,got one from napa years ago ,on the small side
|
|
|
|
Post by sweepleader on Jun 8, 2019 12:20:34 GMT -5
I made a small one to work on car carbs years ago. It was just a 1/4" rod with a gear about 1" thick by 2" diameter for a slide. Pulled plugs with it when cars still had carbs.  KIMG0122 by |
|
