|
Post by maxamow on Apr 25, 2019 21:43:41 GMT -5
Is the handle on a homelite xp1020 unique only to that saw? Mine has a green wrap handle buts its damaged beyond repair. I was wondering if any other models handle would fit. Thank you.
|
|
|
Post by edju1958 on Apr 25, 2019 22:01:59 GMT -5
If I'm not mistaken,the XP-1000 should be the same. Ed
|
|
|
Post by onlyhomelites on Apr 28, 2019 19:56:59 GMT -5
The color will vary, but the handle from the various 2000 saws, 1050 and XP-1000 should all fit your XP-1020.
|
|
|
Post by ronaldt on Apr 28, 2019 22:07:51 GMT -5
If I'm not mistaken, handle off the C series saws will fit also.
|
|
|
Post by maxamow on Apr 29, 2019 16:25:45 GMT -5
Okay, this gives me a wider range to search from. I appreciate the help!
|
|
|
Post by onlyhomelites on Apr 30, 2019 23:44:38 GMT -5
They aren't easy to come by, but if you scour Ebay each night something will turn up!
|
|
|
Post by ronaldt on May 1, 2019 9:37:38 GMT -5
A handle off of a C-5 or C-51 might be the easiest to find. Very common saws. The handle won't be green, it will be bare aluminum but could painted or coated to your taste.
|
|
|
Post by maxamow on May 1, 2019 11:57:44 GMT -5
Okay, i have seen a few handles for that model on ebay. That might be easiest in the long run.
|
|
|
Post by scotts2000 on May 1, 2019 20:42:33 GMT -5
Guys, not saying it wont work but i have not had luck fitting c series airbox/handles on 100plus cc saws. Please note differnt part numbers.. Ipl below for c5 and 1020xp. Keep in mind c series didnt have muffler guard mounting locations and reed cages,carb inlets, mounting patterns are differnt between c series saws.. Not saying these couldnt be modded but do not belive direct bolt in part.. Please check out all the ipl before getting parts. Scott
|
|
|
Post by ronaldt on May 2, 2019 6:37:45 GMT -5
Correct me if I'm wrong but I think maxamow is needing the top grab handle, not the airbox handle. My 1020 had the same problem that the grab handle was roached. I swapped it for a handle from a C-5/C-51. It fit perfectly. Same handle, just not green.
|
|
|
Post by scotts2000 on May 2, 2019 8:33:51 GMT -5
I may have totally missed on that one. Lol.
|
|
|
Post by maxamow on May 2, 2019 12:18:48 GMT -5
Thats correct, its the top grab handle im trying to replace, sorry. Good suggestions by the way, thank you all.
|
|