|
Post by makowicki on Mar 19, 2019 19:58:17 GMT -5
I have a few Super XLs that need crank seals I believe the parts are a 58308-B and a 12282-A or a compatable replacement.
|
|
mack2
Collector wannabe
Posts: 12
|
Post by mack2 on Mar 21, 2019 15:08:29 GMT -5
Hi, the 12282a seal replaced both the 58688 and the 12282 seals completely in 1977 . The SKF seal # CR/SKF 6119 is a standard seal ,you can order from any bearing supplier, right off the shelf. The HM 58308 seal was made for Homelite only , it is now also an off the shelf seal, a number of companies carry it but with different Part Numbers, Here is one for you ,Dichtomatik # 0609318TC ,is 5/8" ID x 15/16" OD x 3/16" wide. (mack2)
|
|
|
Post by Brady m on Jul 12, 2020 14:33:23 GMT -5
Is that for the pro or f/w side? I am also looking for these for a couple of my xl 12s just don’t know what to order for what side
|
|
|
Post by 5terrysupersaws on Jul 12, 2020 15:23:03 GMT -5
Is that for the pro or f/w side? I am also looking for these for a couple of my xl 12s just don’t know what to order for what side The XL-12 used the same seal for both the flywheel and pto side ... 12282-A SKF/CR 6119 (double lip) or SKF/CR 6120 (single lip) can be used as a replacement .
|
|