|
Post by farmer1 on Feb 1, 2019 14:32:44 GMT -5
How high or how low to set the metering lever on the SDC. I believe it should be just even with the outer edges of the carb? Thanks for any help.
|
|
|
Post by 5terrysupersaws on Feb 1, 2019 15:01:51 GMT -5
How high or how low to set the metering lever on the SDC. I believe it should be just even with the outer edges of the carb? Thanks for any help. Metering lever on a SDC carburetor is set level with the chamber floor...level with the carb. edges will cause flooding. A Walbro metering lever gauge 500-13-1 comes in handy for any Walbro carburetor.
|
|
|
Post by farmer1 on Feb 1, 2019 15:24:08 GMT -5
That does make sense. Thanks for a quick answer. I may get this machine going after all.
|
|
|
Post by farmer1 on Feb 1, 2019 17:09:17 GMT -5
Got it going. It starts and runs good. Have not tried to saw yet.This super xl was given to me by my brother-in-law. It came out of a big city fire house where he worked and it seems to me as if it has not been used much. Thanks for the help.
|
|