Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 1, 2018 13:15:48 GMT -5
Really really oiling. I can oil the tin man of Oz from Oklahoma. Any ideas how to slow the flow? Do they make Depends for Chainsaws? Thanks
|
|
|
Post by sweepleader on Aug 1, 2018 13:48:52 GMT -5
There is a switch near the throttle trigger that says "on-off", flip it to "off" and the oil will slow way down. :{)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 1, 2018 14:44:02 GMT -5
There is a switch near the throttle trigger that says "on-off", flip it to "off" and the oil will slow way down. :{) Do you know how many times I read that before I figured out you were pranking me? 3 times, lol. good one, if I lived close by I'd bring it by and start in your shop, you wouldn't have anything that would ever rust again, lol
|
|
|
Post by sweepleader on Aug 1, 2018 17:54:21 GMT -5
Ooops, nobody is ever gonna believe me again.
|
|
|
Post by onlyhomelites on Aug 1, 2018 21:06:48 GMT -5
They are not adjustable....you might be able to slow it down a bit by using a heavier weight oil.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 1, 2018 23:29:21 GMT -5
They are not adjustable....you might be able to slow it down a bit by using a heavier weight oil. I'm going to have to look close and see if I still have an orifice or I have a hole. Hope I don't get banned for this post
|
|
|
Post by onlyhomelites on Aug 3, 2018 8:49:44 GMT -5
I think I'm laughing AND crying right now!
|
|