|
|
Post by friday on Jul 23, 2018 19:56:55 GMT -5
Classic Dr / patient question : "does this look normal to you ?" I measured the holes , the filter end is .090" bore and the tube is .038" bore , maybe brass . certainly doesnt look like the "duck bill" in the parts diagram but looks like a good quality life long item .  " |
|
|
|
Post by undee70ss on Jul 23, 2018 20:11:20 GMT -5
The large piece is the oil pickup filter, the small piece is the bronze tube the duckbill connects to.
|
|
|
|
Post by undee70ss on Jul 23, 2018 20:16:07 GMT -5
|
|
|
|
Post by undee70ss on Jul 23, 2018 20:17:39 GMT -5
The top of the oil tank should look like this. Duckbill is attached to bronze tube.  |
|
|
|
Post by friday on Jul 23, 2018 20:26:59 GMT -5
cheers that diagram does it
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 23, 2018 20:41:31 GMT -5
You Da Man Greg
|
|
kodak
Dumpster Diver
Posts: 21
|
Post by kodak on Aug 22, 2018 11:56:52 GMT -5
So that brass tube is just to mate the duck bill into the oil pressure line
|
|
|
|
Post by undee70ss on Aug 22, 2018 13:29:57 GMT -5
So that brass tube is just to mate the duck bill into the oil pressure line Correct |
|
"
