Post by sugarcreeksaws on Jan 27, 2009 1:30:50 GMT -5
Hi Everyone!
Well, here they are,...bar stencils to dress up your bar! We will be starting with Homelite stencils and will plan on releasing about 4 new stencils a month.....I have over 50 designs currently on file so this is going to become a nice collection of stencils for all makes and models!
When you purchase a stencil set, you receive a stencil for each side of your bar. Transfer tape has already been applied to the stencil, so, they are ready to apply when you receive them. Please refer to the SCS Help Desk section titled "Applying Your Bar Stencils". Here you will find help in making sure you get professional results.
Pricing for all the sets will also be in the SCS Help Desk under the section "Pricing for Bar Stencils".
Whenever I can, I will include either an original bar or one that has had the stencil applied and then painted. This will give a good reference as to how your final paint job will look.
Requests for custom stencils will be considered, however, the original intent of these releases is to recreate some of the old artwork for restorations.
Here you go!!!
Homelite Bar Stencil - SCBTHL01
(Bar not included) This stencil was reproduced off the shorter bar shown, however, it can be applied to longer bars and modified with masking tape. Red was the traditional color used for this design, however, any color can be used. Larger versions will be released in coming months. Email me for suggestions if more input is necessary.
Homelite Bar Stencil - SCBTHL02
(Bar not included) This template is designed for a 16" bar. It can be used on any of the Homelite bars that are hard tip. I have seen this template used on bars that were mounted on XL-100 series saws, XL-12, Super XL as well as 150, EZ and Super EZ. Once again, it can be modified for use on any bar with masking tape. Red was the traditional color used for this design, however, any color can be used. Email me for suggestions if more input is necessary.
Homelite Bar Stencil - SCBTHL03
(Bar not included) This template is designed for a 16" bar. It can be used on any of the Homelite bars that have a sprocket tip. It can be modified for use on any bar with masking tape. Red was the traditional color used for this design, however, any color can be used. Email me for suggestions if more input is necessary.
Homelite Bar Stencil - SCBTHL04
(Bar not included) This is a design that was seen on a bar that was recently posted in an online sales site. I am not sure if this was an actual bar design offered, however, it is very cool looking! I can see a bar painted with this stencil using Homelite blue. Masking tape can be used to modify this design. Email me for suggestions if more input is necessary.
Well, here they are,...bar stencils to dress up your bar! We will be starting with Homelite stencils and will plan on releasing about 4 new stencils a month.....I have over 50 designs currently on file so this is going to become a nice collection of stencils for all makes and models!
When you purchase a stencil set, you receive a stencil for each side of your bar. Transfer tape has already been applied to the stencil, so, they are ready to apply when you receive them. Please refer to the SCS Help Desk section titled "Applying Your Bar Stencils". Here you will find help in making sure you get professional results.
Pricing for all the sets will also be in the SCS Help Desk under the section "Pricing for Bar Stencils".
Whenever I can, I will include either an original bar or one that has had the stencil applied and then painted. This will give a good reference as to how your final paint job will look.
Requests for custom stencils will be considered, however, the original intent of these releases is to recreate some of the old artwork for restorations.
Here you go!!!
Homelite Bar Stencil - SCBTHL01
(Bar not included) This stencil was reproduced off the shorter bar shown, however, it can be applied to longer bars and modified with masking tape. Red was the traditional color used for this design, however, any color can be used. Larger versions will be released in coming months. Email me for suggestions if more input is necessary.
Homelite Bar Stencil - SCBTHL02
(Bar not included) This template is designed for a 16" bar. It can be used on any of the Homelite bars that are hard tip. I have seen this template used on bars that were mounted on XL-100 series saws, XL-12, Super XL as well as 150, EZ and Super EZ. Once again, it can be modified for use on any bar with masking tape. Red was the traditional color used for this design, however, any color can be used. Email me for suggestions if more input is necessary.
Homelite Bar Stencil - SCBTHL03
(Bar not included) This template is designed for a 16" bar. It can be used on any of the Homelite bars that have a sprocket tip. It can be modified for use on any bar with masking tape. Red was the traditional color used for this design, however, any color can be used. Email me for suggestions if more input is necessary.
Homelite Bar Stencil - SCBTHL04
(Bar not included) This is a design that was seen on a bar that was recently posted in an online sales site. I am not sure if this was an actual bar design offered, however, it is very cool looking! I can see a bar painted with this stencil using Homelite blue. Masking tape can be used to modify this design. Email me for suggestions if more input is necessary.