Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 4, 2018 20:59:58 GMT -5
Is the following a Homelite guide bar part number and if so about what saws does it fit?
SP 28383 H5
|
|
|
Post by Clasec on Jun 4, 2018 21:52:13 GMT -5
|
|
|
Post by undee70ss on Jun 4, 2018 21:58:06 GMT -5
Yes. Sprocket nose, 28 inch bar, 3/8 pitch, .063 gauge, 5 mount. Fits the 450,550, 650, 750, SXL925 etc..,!
|
|
|
Post by undee70ss on Jun 4, 2018 22:01:14 GMT -5
Given it’s the “H” revision, probably for a 540 or 8800 saws, as these were the only saws using a .063 gauge with a 5 mount when the bar was sold new.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 4, 2018 22:03:33 GMT -5
Thanks!! That’s the thread I was looking for just couldn’t find it
|
|
|
Post by undee70ss on Jun 5, 2018 1:17:29 GMT -5
Is the following a Homelite guide bar part number and if so about what saws does it fit? SP 28383 H5 If you are referring to a bar on eBay, that is probably not a SP28383-H5. It’s a GW3000?-?5. From its looks, I’m guessing it’s a F revision or earlier. There’s no way of knowing the gauge either unless seller shows numbers on bar or measures it. JLYK.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 5, 2018 11:51:49 GMT -5
Is the following a Homelite guide bar part number and if so about what saws does it fit? SP 28383 H5 If you are referring to a bar on eBay, that is probably not a SP28383-H5. It’s a GW3000?-?5. From its looks, I’m guessing it’s a F revision or earlier. There’s no way of knowing the gauge either unless seller shows numbers on bar or measures it. JLYK. Lol Yes I am referring to that bar thanks for letting me know. What would the F revision be?
|
|
|
Post by undee70ss on Jun 5, 2018 12:49:15 GMT -5
The revision letter changed every time Homelite changed something on their bars ( safety tip, bar material, paint scheme etc...)
|
|
will
Collector
Posts: 80
|
Post by will on Jun 6, 2018 21:34:02 GMT -5
Is the following a Homelite guide bar part number and if so about what saws does it fit? SP 28383 H5 If you are referring to a bar on eBay, that is probably not a SP28383-H5. It’s a GW3000?-?5. From its looks, I’m guessing it’s a F revision or earlier. There’s no way of knowing the gauge either unless seller shows numbers on bar or measures it. JLYK. The seller said the gauge is .050
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 7, 2018 9:04:34 GMT -5
Is the following a Homelite guide bar part number and if so about what saws does it fit? SP 28383 H5 If you are referring to a bar on eBay, that is probably not a SP28383-H5. It’s a GW3000?-?5. From its looks, I’m guessing it’s a F revision or earlier. There’s no way of knowing the gauge either unless seller shows numbers on bar or measures it. JLYK. There is a link on every eBay ad to ask the seller or to contact the seller to answer a question, most times sellers get back fairly quickly.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 7, 2018 15:14:25 GMT -5
Yea I started to ask the seller a few questions but he stated in his description he was unsure of what it fit
|
|