Post by Deleted on Mar 26, 2018 22:41:19 GMT -5
Today I decided to look in my shed to see what I had left untouched for saws to work on.I spotted another EZ that I'd gotten back in Jan.I remember going through the saws at the time,but after picking up 30 I kinda lost track.This saw is red & white & is identical to the blue EZ I have.It has only a manual oiler on it as well.The chain was a little stiff from sitting for yrs.I popped the muffler off to look at the piston & cylinder - all looked good there.The oiler was slightly plugged,but after running some kerosene through it,it works fine now.I checked for spark on what looked like a new plug - it's got great spark.The next test was to prime it & see if it'd fire.I had to put fuel in the plug hole & then she fired.I need a new pawl stud,spring,pawl & washer.It cranks nice with just one,but I think two is better.It needs a new fuel line & a carb rebuild too.It has a Zip Penn bar on it from way back in the day.The saw wasn't used that much because there's still red paint on the handle,the muffler is chrom like new,& it has great compression.The only downfall is - there are no tags to be found anywhere on the saw.I'll post pics tomorrow.
20180327_105137 by edju1958, on Flickr
20180327_105047 by edju1958, on Flickr
20180327_105026 by edju1958, on Flickr
20180327_105026 by edju1958, on Flickr
20180327_105137 by edju1958, on Flickr20180327_105047 by edju1958, on Flickr20180327_105026 by edju1958, on Flickr20180327_105026 by edju1958, on Flickr
