Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 4, 2018 15:56:48 GMT -5
H Joyce,Would you have a new oil pump diaphragm for a 150 automatic?Part # A-68583-B
|
|
|
Post by chainsawlady on Mar 4, 2018 20:49:13 GMT -5
I do have an oil plunger for the 150, but the last published price in a price list 2001 edition was $8.21. The earlier 150 had a thinner diaphragm with two gaskets on both side. Then they made them thicker and didn't use any gaskets. I think I read that Sugar Creek is going to start making them also. joycewilson26@gmail.com
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 5, 2018 9:30:01 GMT -5
My saw's mfgr.date was 1973 (red).I opened up the pump assy.yesterday & it seemed to be a thicker plunger,there were no gaskets on it.Which plunger do you have,thick or thin w/gaskets? Ed
|
|
|
Post by chainsawlady on Mar 5, 2018 23:24:12 GMT -5
edju Have been checking my 150 oil pump parts. I have the following 2 - new thick plunger, 2 used thick and 2 used thin with gaskets. Price on new is $8.21. Used $4.00. I think you would want to get the new one as long as they are available. joycewilson26@gmail.com
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 8, 2018 18:33:36 GMT -5
I ended up getting a pump diaphragm & a coil wire from Leon.I didn't want to put a thin diaphragm pump in the saw & I didn't want to put a used one in either.Thank you anyway Joyce.
|
|