|
|
Post by hewhoswingsinthetree on Mar 4, 2018 13:51:49 GMT -5
Hi all,
I'm new to the site, but Leon told me to start here with my quest.
I'm trying to locate a 2:1 gear that fits a Homelite 1130G/3100G chainsaw. I was told that chainsawlady might be able to help out? The part number is 59298-1 it's 42-teeth. I'm also looking for a muffler guard for another saw 64836-2.
I have a NOS part number 65807-2 that doesn't fit my application, I'd be glad to trade/swap for the one I need. Thank you to anyone who might be able to help. 530-306-4955
|
|
|
|
Post by Clasec on Mar 4, 2018 14:06:34 GMT -5
|
|
|
|
Post by undee70ss on Mar 4, 2018 14:15:10 GMT -5
Welcome to the House of Homelite.
The 2 to 1 ratio was optional. That will be a tough find. I just sold a muffler shield 64836 to another member here a couple of weeks ago, I don’t have any more.
|
|
|
|
Post by hewhoswingsinthetree on Mar 4, 2018 14:17:16 GMT -5
Clasec
That’s just like the NOS one that I have, but that one doesn’t t fit my saw- nice find!
|
|
|
|
Post by undee70ss on Mar 4, 2018 14:21:07 GMT -5
That’s just like the NOS one that I have, but that one doesn’t t fit my saw- nice find! What saw is it that it doesn’t fit? |
|
|
|
Post by hewhoswingsinthetree on Mar 4, 2018 14:35:33 GMT -5
Undee70ss,
It’s a 3100G- I’ll try and post some pics
|
|
|
|
Post by hewhoswingsinthetree on Mar 4, 2018 15:42:43 GMT -5
|
|
|
|
Post by hewhoswingsinthetree on Mar 4, 2018 15:43:29 GMT -5
|
|
|
|
Post by hewhoswingsinthetree on Mar 4, 2018 15:45:54 GMT -5
k I think I’m the hang of how to upload. 
 |
|
|
|
Post by hewhoswingsinthetree on Mar 4, 2018 15:49:57 GMT -5
Ok I’m terrible at this obviously, so I stand corrected-
muffler guard 65807-2 does fit my saw, but I would need at least 1” longer bolts. I guess it’s made to fit a larger muffler?
At any rate muffler guard 64836-2 fits much closer to the actual muffler and that’s hat I’m after- I’m sure I’ll learn some more along the way. Thanks for your patience
|
|
|
|
Post by undee70ss on Mar 4, 2018 15:57:34 GMT -5
Ok I’m terrible at this obviously, so I stand corrected- muffler guard 65807-2 does fit my saw, but I would need at least 1” longer bolts. I guess it’s made to fit a larger muffler? At any rate muffler guard 64836-2 fits much closer to the actual muffler and that’s hat I’m after- I’m sure I’ll learn some more along the way. Thanks for your patience Correct. It fits your saw but it’s not technically correct. It is for the 2100 Super with the downdraft muffler, the reason why it’s a little bigger. |
|
|
|
Post by undee70ss on Mar 4, 2018 15:59:17 GMT -5
Do you have the piece that’s missing on the correct shield?
|
|
|
|
Post by hewhoswingsinthetree on Mar 4, 2018 16:15:27 GMT -5
No that’s how I got the saw-
|
|
