|
|
Post by brushcutter on Feb 25, 2018 19:53:16 GMT -5
What carb kit do I need to buy for a Walbro HDA 60 carburetor on my XL-2? I found it in the junkyard the other day, had a new Oregon sprocket and chain plus a new GB bar. I cleaned it up, put new hoses and filters on it and a new spark plug. It will run for little while then die. Has good spark so I am thinking the carburetor needs a kit put in it. Any thoughts on it? Thanks, Tim
|
|
|
|
Post by dieseltech on Feb 25, 2018 20:23:57 GMT -5
you might try disassembling the carb & cleaning it. I also had an XL that must have had water in it when I took the carb off there was a large mass of corrosion blocking the reed cleaned it out it is one of my go to saws now
|
|
|
|
Post by brushcutter on Feb 25, 2018 20:44:41 GMT -5
When I take the carburetor off, I want to put a full kit in it like I've done with my Super XL's. Kits aren't that expensive. I just need to know the Walbro kit to buy for it
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 25, 2018 21:02:05 GMT -5
I will look a little more but I am coming up with a K10 WAT kit
|
|
|
|
Post by 5terrysupersaws on Feb 25, 2018 21:02:18 GMT -5
Walbro HDA 60 = K22-HDA carb.kit
|
|
|
|
Post by undee70ss on Feb 25, 2018 21:03:39 GMT -5
What carb kit do I need to buy for a Walbro HDA 60 carburetor on my XL-2? I found it in the junkyard the other day, had a new Oregon sprocket and chain plus a new GB bar. I cleaned it up, put new hoses and filters on it and a new spark plug. It will run for little while then die. Has good spark so I am thinking the carburetor needs a kit put in it. Any thoughts on it? Thanks, Tim Are you sure it’s a HDA? Those saws usually have a HDC. Just asking. |
|
|
|
Post by undee70ss on Feb 25, 2018 21:16:46 GMT -5
What carb kit do I need to buy for a Walbro HDA 60 carburetor on my XL-2? I found it in the junkyard the other day, had a new Oregon sprocket and chain plus a new GB bar. I cleaned it up, put new hoses and filters on it and a new spark plug. It will run for little while then die. Has good spark so I am thinking the carburetor needs a kit put in it. Any thoughts on it? Thanks, Tim The original carburetor must have been replaced later in its life, as HDA 60’s were the replacements. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 25, 2018 21:20:28 GMT -5
yes please ignore me the K22-HDA is correct. I think I just stumbled on some of my more recent carb issues though.
|
|
|
|
Post by brushcutter on Feb 25, 2018 22:19:36 GMT -5
Yes the carburetor is a HDA 60. I have a HDA 60 on my Super 2 as well, it is a replacement carb as it had a HDC 57 when I bought it. Thanks, Tim
|
|
|
|
Post by undee70ss on Feb 25, 2018 23:02:18 GMT -5
Yes the carburetor is a HDA 60. I have a HDA 60 on my Super 2 as well, it is a replacement carb as it had a HDC 57 when I bought it. Thanks, Tim Then the K22-HDA is the kit you want. |
|
|
|
Post by tjthechainsawmech on Feb 26, 2018 20:55:20 GMT -5
k22-hda
|
|
ctbale
Collector wannabe
Posts: 18
|
Post by ctbale on Aug 9, 2018 10:47:25 GMT -5
Thought I would ask the Question here instead of starting a new thread. On my XL Automatic Oiler. UT-10618A SN 7E0900645 Its has A Walbro carb, says HDC on it. The IPL says its a HDC-15 I am finding 2 carb kits for it. K10-HDC and the D10-HDC Any ideas?
|
|
|
|
Post by undee70ss on Aug 9, 2018 14:25:26 GMT -5
Thought I would ask the Question here instead of starting a new thread. On my XL Automatic Oiler. UT-10618A SN 7E0900645 Its has A Walbro carb, says HDC on it. The IPL says its a HDC-15 I am finding 2 carb kits for it. K10-HDC and the D10-HDC Any ideas? The K10-HDC is the complete kit. D10-HDC is just the gaskets. |
|
