Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 25, 2018 16:45:21 GMT -5
I got an early red and white Super EZ Auto and the manual says that for models that fall below serial number 40XXXXXX to use part number A-65200-1 for the drive case. Is this the same as A-65200-B or -A? My drive case is cracked right at the adjustment screw and I was going to buy a new drivecase.
|
|
|
|
Post by onlyhomelites on Jan 25, 2018 17:58:39 GMT -5
It depends on your oil pump setup...if you have a hose running down to the automatic oil pump, you need the later design. The early model feeds oil to the automatic pump through the manual oil pickup and through the drivecase.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 25, 2018 18:38:25 GMT -5
It depends on your oil pump setup...if you have a hose running down to the automatic oil pump, you need the later design. The early model feeds oil to the automatic pump through the manual oil pickup and through the drivecase. I have the older one |
|
|
|
Post by onlyhomelites on Jan 25, 2018 23:33:40 GMT -5
Okay, I just looked at the revision 1 IPL and I forgot that the updated drivecase got a new number. Any A-65200-* will work for your saw.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 25, 2018 23:39:01 GMT -5
Okay, I just looked at the revision 1 IPL and I forgot that the updated drivecase got a new number. Any A-65200-* will work for your saw. Thanks a bunch. My saw is a 1973 saw, the early version. I'm ordering a new A-65200B drive case to replace the broken part |
|
