|
|
Post by jerseyhighlander on Nov 9, 2017 0:50:34 GMT -5
I've a got a Super 2 with a UT#10520a that doesn't seem to turn up anywhere. The serial # is 7E2781207. Was just trying to find the right IPL for it and there must be 15 for the Super 2, some with UT #'s, some not. What are these UT #'s anyway and how do I figure out which IPL I need? Trying to find some parts and want to make sure I'm getting the right things. 7E2781207
I've also got a second Super 2 that I initially thought I might just keep for parts but not so sure, I may make two functional saws. It doesn't have a UT #. It has Lot # G6344 & Serial 45581376. This one I believe is a points ignition and the previous is coil & electronic.
Once again. Help with this much appreciated.
|
|
|
|
Post by undee70ss on Nov 9, 2017 3:42:46 GMT -5
|
|
|
|
Post by jerseyhighlander on Nov 9, 2017 12:00:18 GMT -5
Thanks undee.
So these UT #'s are essentially version #'s or something? Been trying to make sense of them, looking for parts for the Super2 is daunting, way too many UT#s to filter through.
|
|
|
|
Post by undee70ss on Nov 9, 2017 23:49:49 GMT -5
They started putting UT numbers on Super 2 IPL’s when they changed the design to a single trigger.
|
|
|
|
Post by jerseyhighlander on Nov 10, 2017 0:55:54 GMT -5
So I managed to find some time to start working on the Super2 UT-10520A this evening and remembered the Walbro HDC carbs have a date of manufacture stamped in them. This one was 9/83 and the other that just had the short Lot # & serial number, obviously an older saw since it has points/condenser, was 11/76. Don't know if the Tillotson Carbs have any dates on them but at least with the Walbro you have something more than just the serial or UT#.
I'm just trying to figure out the system cause it seams like some parts are appropriate for one UT# but not for another. Understandable on something like the ignition that might have changed from points to electronic but I've seen this in regards to the duckbill check valves.
|
|
|
|
Post by sweepleader on Nov 10, 2017 9:49:14 GMT -5
... I'm just trying to figure out the system ... Welcome to the club, now you are starting to have some fun, eh? |
|
|
|
Post by fossil on Dec 7, 2017 19:34:38 GMT -5
I've a got a Super 2 with a UT#10520a that doesn't seem to turn up anywhere. The serial # is 7E2781207. Was just trying to find the right IPL for it and there must be 15 for the Super 2, some with UT #'s, some not. What are these UT #'s anyway and how do I figure out which IPL I need? Trying to find some parts and want to make sure I'm getting the right things. 7E2781207 I've also got a second Super 2 that I initially thought I might just keep for parts but not so sure, I may make two functional saws. It doesn't have a UT #. It has Lot # G6344 & Serial 45581376. This one I believe is a points ignition and the previous is coil & electronic. Once again. Help with this much appreciated. Here's an IPL for the 10520A www.barrettsmallengine.com/partslist/homelitesuper2ut10520a.pdf |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 7, 2017 20:20:04 GMT -5
I'm not sure if it is a Wico system on the older points style ignition or if it is the same as the EZ's, but I have a older Super EZ Auto with Wico flywheel, new points, new condenser, that I am going to part out. I'm taking the bar and chain for another saws and going to sell the rest of the parts as I have four SEZ saws
|
|
