Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 13, 2017 22:10:31 GMT -5
I have two Homelite XL-850's one is serial number 2391641 and it has a bolt together case, the other XL-850 is serial number 2747636 and it has a glued (now welded) case. My XL-800 serial number 213255 has a glued case, but my XL-901 serial number 2944197 and my XL-903 serial number 3123426 have bolt together cases. Do the serial numbers show the earlier saws were bolt together cases, later saws, or have no bearing whatsoever? Thanks, Alain
|
|
|
|
Post by undee70ss on Sept 14, 2017 10:19:31 GMT -5
|
|
|
|
Post by stillsawing on Sept 14, 2017 11:41:32 GMT -5
May not answer the question of why one is cemented and not the other, but does point out that any leaks will not be repaired under warranty . A little out of the expiration date. Nice to know about the number on the bumper area.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 14, 2017 21:01:08 GMT -5
May not answer the question of why one is cemented and not the other, but does point out that any leaks will not be repaired under warranty . A little out of the expiration date. Nice to know about the number on the bumper area. Wow that is great info. Thank you! |
|
