|
Post by redsqwrl on Nov 16, 2008 20:24:58 GMT -5
Hello, I am new and looking for a place to look up my part numbers for the parts I desire. Is there a magic spot to find and cross reference my Ut and Ser #.
I am looking for various drum and sprocket combinations. I also want rim drive options for my c7 1050 and 750.
I feel like a tool asking if any one has a massive bucking spike(s) and full wrap handle for a 750. If I could find a piston I could make another 750 run. I found this site searching blindly for part numbers. Any one know of any posted parts places?? Mike
|
|
|
Post by biggreen on Nov 17, 2008 11:00:26 GMT -5
Go to the parts sales section on this site!
|
|
|
Post by redsqwrl on Nov 17, 2008 18:41:43 GMT -5
Yes I see that there are helpful people there, But I was hoping to make my request with specific part numbers.
I looked around and it seems everybody has a way to find these part numbers.
Mike
|
|
|
Post by redsqwrl on Nov 17, 2008 21:14:50 GMT -5
I found part numbers. Lots of them.
Time to shop.
mike
|
|
|
Post by lesorubcheek on Nov 18, 2008 8:16:04 GMT -5
Mike, I'm always digging through IPLs myself for part numbers. After a little while, alot of the numbers kinda grow on you. The one thing I don't have that I would like is a cross reference from a part number to all saws it fits on. I've thought about trying to compile a database of some sort, but as soon as I realize the amount of time it would take, I back away from the idea.
Dan
|
|
|
Post by billg on Nov 21, 2008 1:56:33 GMT -5
........................ I am looking for various drum and sprocket combinations. I also want rim drive options for my c7 1050 and 750. ...................... If I could find a piston I could make another 750 run. ....................... Mike Mike, I am not sure if you are aware but there is basically only one rim drive option for the 1050. It is a 8 tooth .404 pitch. Homelite put a 6 spline rim drive system on the 1050 and 2100. That really handicapped themselves. Everyone else used the 7 spline Oregon system. Homelite did produce a 7 spline drum but it was in very limeted numbers. Now for a 750 piston that is almost as rare if not rarer, Bill
|
|
|
Post by redsqwrl on Nov 23, 2008 17:11:49 GMT -5
Yah I found a bunch of R/D combinations for the c series saw. and some how just thought that I would be able to cook up some various drive options for the bigger saw.
Mike
|
|
|
Post by billg on Nov 29, 2008 2:07:57 GMT -5
Yah I found a bunch of R/D combinations for the c series saw. and some how just thought that I would be able to cook up some various drive options for the bigger saw. Mike I wish it was possible
|
|
|
Post by billg on Nov 29, 2008 2:10:48 GMT -5
I see you are in East Central WI. Where are you at ? It would be great to get some more old Homelites at some of our shows in SW WI.
Bill
|
|