|
Post by oldachonoak on May 10, 2017 7:06:05 GMT -5
I have it running thought the carb was leaking but it is spitting fuel out. I remember a video or I read that there was a cover that you could put in front of carb to catch fuel. Any one heard of this? Ted
|
|
|
Post by oldachonoak on May 10, 2017 8:14:21 GMT -5
I just found out were I saw it it was on the chain saw guy video there was a small filter in front of the carb held on buy a clip or some that attached to the air filter post. Any one have an idea how to get one or how to stop the spitting. I don't want to lean the saw out to much.
|
|
|
Post by undee70ss on May 10, 2017 8:44:05 GMT -5
What kind of carb does it have? 925's do have a air deflecter in front of the carb.
|
|
|
Post by undee70ss on May 10, 2017 8:48:51 GMT -5
. I don't want to lean the saw out to much. Where is the "H" set now? 925's have a fixed jet carb with governor.
|
|
|
Post by undee70ss on May 10, 2017 11:01:24 GMT -5
I just found out were I saw it it was on the chain saw guy video there was a small filter in front of the carb held on buy a clip or some that attached to the air filter post. Any one have an idea how to get one or how to stop the spitting. I don't want to lean the saw out to much. One of these. www.leonschainsawpartsandrepair.com/apps/search?q=67101
|
|
|
Post by oldachonoak on May 12, 2017 6:29:57 GMT -5
Tiloston Carb (spelling?) That is the Leone I will have to see if Leon is going to buy the saw then he can just put it on. Not sure were the H is set I think it was one turn out. Ted
|
|