|
Post by gsers on Apr 2, 2016 8:20:50 GMT -5
I have one each of these units and wondered if anyone could provide some information on how to get hold of parts diagram and list for them.
The XL76 needs a fuel line and carb rebuild kit.
The XL130 needs fuel line and carb rebuild and although it has a good spark, I'm thinking the timing is out of wack. It appears to have an electronic module (red in colour) found near the coil. If I'm correctly assuming the red part is the ignition module, I'd like to try replacing same and will need to source this part as well.
I will appreciate any help you can provide. Thanks,
|
|
|
Post by Supercharged86 on Apr 2, 2016 12:14:52 GMT -5
Welcome, I believe your two saws are Canadian versions of US based units. I'd be willing to bet that the serial tags on both will read Homelite-Terry, Pointe Claire, Quebec. Finding IPL's for the Canadian versions will be tough, however, take a look at this older post for some information. houseofhomelite.proboards.com/thread/1894/xl-76-rebuild-coming-nicelyThe XL-76 is based on the US XL-123, the XL-130 I'm not sure of. However, You will likely be able to find parts based on the US versions and can use the US version IPL's. See our fellow member and friend, Leon, aka OnlyHomelites, for IPL's and parts. www.leonschainsawpartsandrepair.com/parts-diagrams.htmlGood luck with your projects. Steve
|
|
|
Post by gsers on Apr 3, 2016 8:49:34 GMT -5
Thanks for the help and getting me pointed in the right direction. Cheers
|
|