|
Post by robsuper2 on Dec 21, 2014 17:32:00 GMT -5
Hello all,
Bought a Poulan saw for 25 buck that worked great until I noticed the filter bouncing around in the tank. I bought a universal fuel line kit that has two sizes. The smaller fits into the tank snugly but doesn't fit the filter or carb. Both Tractor Supply and Ace sell similar kits with the small line ID being too small for the filters that they sell.
Is there a proper way to expand the line? Seems kind of ignorant to sell line and filters that don't work together.
|
|
|
Post by sawnami on Dec 21, 2014 18:06:12 GMT -5
Might try a heat gun or hair dryer.
|
|
|
Post by robsuper2 on Dec 21, 2014 23:32:29 GMT -5
Might try a heat gun or hair dryer. Should I push a nail into the line with some heat to expand it? It seems obvious to try but if that makes the line fail prematurely I would look for different line that fits better. I'll give it a try. The little Poulans are pretty easy to take apart if I screw the line up and have to replace it again.
|
|