ag
Groundie
Posts: 3
|
Post by ag on Mar 16, 2014 14:36:32 GMT -5
Hello, I am new here. I have an old XL2 little red stored for a while. May be 15 year with no use. When I tried to run it, it was not possible so I disassembled the carburator just to clean it. Now I am not able to install the saw again. I have all mounted, but I dont remenber the position of the throttle rod attaching to the carburator. I did not take pics... I am a bloody donkey... So, I am posting this just requesting some help. I have done pics of the rod, and the linkages. Please, your help is strongly appreciated. I want to give that little red alive again... Thanks!!
|
|
ag
Groundie
Posts: 3
|
Post by ag on Mar 16, 2014 14:37:52 GMT -5
And the last pic I have
|
|
|
Post by sawnami on Mar 16, 2014 15:32:05 GMT -5
Here you go. The linkage has to be started into the holes as you slide the engine into the housing.
|
|
|
Post by sawnami on Mar 16, 2014 15:58:12 GMT -5
Mine are all like this. I think think yours looks closer to this.
|
|
ag
Groundie
Posts: 3
|
Post by ag on Mar 17, 2014 16:01:58 GMT -5
Many thanks. I will try next weekend. And indeed, my linkake is similar than the one on the second pic. It is not simmetrical as yours.
|
|