|
|
Post by RedZeppelinXJ on Oct 22, 2012 17:10:17 GMT -5
Hey guys I have a Super EZ my brother in law gave me. I got it to run when cold but once it warms up and you shut it off it will not start nomatter how hard or how many times i pull the cord.....
anyone have an idea of what the problem is?
|
|
|
|
Post by tribulation138 on Oct 22, 2012 19:27:42 GMT -5
what is the compression of the saw?
are the cylinder fins clean and free of dirt and debri?
|
|
|
|
Post by RedZeppelinXJ on Oct 23, 2012 12:31:25 GMT -5
I don't have a compression tester but it feels good. The saw is probly too dirty....I will try cleaning out the fins.
Do you think it is getting too hot and vaporlocking the fuel?
|
|
|
|
Post by tribulation138 on Oct 23, 2012 17:39:14 GMT -5
could be the gas tank cap vent is blocked
|
|
|
|
Post by cblackky on Oct 24, 2012 7:11:19 GMT -5
look for spark when hot ... its a timeframe heat thing if got spark when hot then its gas
|
|
|
|
Post by RedZeppelinXJ on Oct 27, 2012 21:38:57 GMT -5
how do u check the tank cap vent?
|
|
|
|
Post by tribulation138 on Oct 27, 2012 22:45:30 GMT -5
loosen gas cap when running. if the saw doesnt stall out you know its a block vent hole
|
|
|
|
Post by cblackky on Oct 28, 2012 15:19:54 GMT -5
what test have you done what have you found is it gas or spark  ? |
|
