|
Post by xtraemail on Oct 12, 2012 16:43:38 GMT -5
Looking for some help in finding a 16 inch bar that fit my super EZ AO. The saw was made around 1978 and still runs well, but the bar is worn out. Original bar shows " 009 Homelite PT 16381-D3"
Any suggestions about which, if any, bar/chain combos fit the saw. I can't find an OEM part, but does Oregon, Husky, or Stihl makle a bar/chain that fits my saw?
Thanks.
|
|
|
Post by tribulation138 on Oct 12, 2012 17:52:28 GMT -5
SEZ_AUTO uses a 9.5mm or 3/8 bolt mount size
Carlton: 20/21 Oregon: D196, D096 Windsor: UXL or TXL GB: HN
|
|
|
Post by karstendd on Oct 13, 2012 0:38:15 GMT -5
Oregon 160PXDD176 bar, 72V059G chain. There are a couple other options for both the bar and and chain but those would be the ones I would get for a customer.
|
|
|
Post by Supercharged86 on Dec 11, 2014 9:27:26 GMT -5
SEZ_AUTO uses a 9.5mm or 3/8 bolt mount size Carlton: 20/21 Oregon: D196, D096 Windsor: UXL or TXL GB: HN I know this is from long ago, but sorry, I have to disagree here. The Super EZ uses a Homelite #3 small mount, ie. PT-16381-D 3 bar, which is 8.2mm not 9.5mm. This is equivalent to a Oregon K095 mount (per Oregon if you don't believe me). Likewise the bar mount studs are 5/16" not 3/8". Cheers. Steve
|
|
|
Post by Supercharged86 on Dec 11, 2014 9:36:17 GMT -5
Oregon 160PXDD176 bar, 72V059G chain. There are a couple other options for both the bar and and chain but those would be the ones I would get for a customer. A D176 mount may work with a 8.0mm mount slot, but looks to be much wider at the tail and the oil hole appears to be much higher. Does it line up properly with the oiler? Cheers. Steve
|
|
|
Post by chainsawlady on Dec 11, 2014 21:33:08 GMT -5
SEZ_AUTO uses a 9.5mm or 3/8 bolt mount size Carlton: 20/21 Oregon: D196, D096 Windsor: UXL or TXL GB: HN I have 13 original Super EZ Homelite bars PT-16381. Some are silver and some gray finish - 3/8 pitch sprocket nose. Also have several Oregon 2-piece sprockets. chainsawlady
|
|