|
|
Post by MCS on Mar 15, 2012 9:30:08 GMT -5
i have a homelite 26 lcs with a 30 inch bar,can i get a replacement chain and bar if so who makes them and what model numbers do i need : You will have trouble with this but every once-in-awhile one passes through on ebay. You will not find a new one, only used. There are shops that rebuild bars which is a good option. What gauge is the groove? Most likely .063" but could be .050". Chain: Is any number stamped into the drive link? 9/16 pitch was pretty common with this saw but it could have been changed to something else. What is the condition of the sprocket itself? Does it have grooves showing in the teeth? |
|
|
|
Post by chainsawlady on Mar 15, 2012 11:30:45 GMT -5
MCS
I have several new Homelite bars for the Homelite belt driven saws. .050 and .063. Some have rust spots and are in various conditions, reasonably priced. 5 - 18" = 1 - 23" = 6 -28". Also have 21 used bars for these saws in various conditions. They can send me a PM.
chainsawlady
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Mar 16, 2012 8:59:24 GMT -5
What size is the chain? Pitch and gauge?
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Mar 17, 2012 6:44:30 GMT -5
Reported by sdeblois on Yesterday at 12:45pm for the following reason:
9/16-.063 i think
|
|
