|
Post by bulldozer24 on Mar 4, 2012 9:26:27 GMT -5
well when i say new bar i mean new to me. I need a 18 or 20in roller nose for my sxl thats in relatively good shape. or if there is a bar made by oregon or another reputable company, that will fit that would be cool to. Just want to mention again its for my early model sxl.
|
|
|
Post by tribulation138 on Mar 4, 2012 13:53:38 GMT -5
there is a bunch of different brands on ebay. just make shore its for a 3/8 inch pitch chain and holes mounts are correct
|
|
|
Post by chainsawlady on Mar 4, 2012 17:35:23 GMT -5
I have 15" 17428 roller nose bars for the Homelite XL series saws. It is short for that saw but that is all I have left in the RN series. chainsawlady
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Mar 4, 2012 19:49:11 GMT -5
The new Oregon bars available are all 20", no new 18" bars listed. They are 200GLHD196 Prolite, 200RNDD196 powermatch or the 200GDDD096 Double Guard. I have the Powermatch and DoubleGuard bars. I'll PM you the info.
Dewayne
|
|
|
Post by chainsawlady on Mar 24, 2012 16:01:24 GMT -5
well when i say new bar i mean new to me. I need a 18 or 20in roller nose for my sxl thats in relatively good shape. or if there is a bar made by oregon or another reputable company, that will fit that would be cool to. Just want to mention again its for my early model sxl. I have a few 15" Oregon 17428 roller nose bars for the Homelite XL and SXL saws. chainsawlady
|
|
|
Post by MCS on Mar 24, 2012 19:38:46 GMT -5
well when i say new bar i mean new to me. I need a 18 or 20in roller nose for my sxl thats in relatively good shape. or if there is a bar made by oregon or another reputable company, that will fit that would be cool to. Just want to mention again its for my early model sxl.Does this mean the saw has 5/16" bar studs? If so you will need and "S" clip that allows the 3/8" bars to mount.
|
|
|
Post by chainsawlady on Mar 25, 2012 7:22:19 GMT -5
well when i say new bar i mean new to me. I need a 18 or 20in roller nose for my sxl thats in relatively good shape. or if there is a bar made by oregon or another reputable company, that will fit that would be cool to. Just want to mention again its for my early model sxl.Does this mean the saw has 5/16" bar studs? If so you will need and "S" clip that allows the 3/8" bars to mount. If I remember correctly only a few early XL-12 had the small stud which needs the clip for the later bars. No Super XL came out with the small stud. chainsawlady
|
|