|
Post by greg409 on Sept 13, 2011 19:26:34 GMT -5
I just pulled the clutch shell to grease the brg on my sxlao.
Afterwards I thought maybe what I took for granted may be a tip for others.
I used my rubber strap wrench on the flywheel - works great
greg
|
|
|
Post by tribulation138 on Sept 13, 2011 19:50:32 GMT -5
wait a minute. how did you get the flywheel off? usually you have to hit center of crank shaft to get off.
|
|
|
Post by Brian VT on Sept 13, 2011 21:09:37 GMT -5
I don't think he took the flywheel off. He just held the flywheel with the strap wrench instead of using a piston stop when removing the clutch.
|
|
|
Post by tribulation138 on Sept 14, 2011 5:22:50 GMT -5
oh oh.. my bad
|
|
|
Post by MCS on Sept 14, 2011 7:39:09 GMT -5
Maybe nobody has ever told greg about pulling the plug and stuffing some rope into the cylinder? He's been informed now ;D
|
|
|
Post by Brian VT on Sept 14, 2011 9:07:22 GMT -5
It may be safer to use his idea ? I use the rope trick but I've heard of folks getting it in the ports and cutting it and getting bits of rope into the crank case.
|
|