|
Post by ericsauvage08 on Aug 18, 2011 21:20:20 GMT -5
I have a Super EZ Automatic, serial: 40302551, and am looking for the correct bar/chain for it. We just blew out the gear at the end of the bar (which was a replacement) and are fairly certain it was not the correct bar. 16" is what we need and I am finding conflicting information as to the pitch and # of drive links. Any suggestions? Currently, the chain is (I think) 3/8 with 59 drive links. We tried a Husky bar, .325, 66DL, .050 and the chain pulls very hard, but throw the 59DL chain on there and it feels fine (we know the old chain and husly bar don't match). We initially thought, due to internet research, that it needed a .325, 67DL, .050.
Your help would be GREATLY appreciated!!
|
|
|
Post by MCS on Aug 18, 2011 21:53:28 GMT -5
The correct 16" bar on a SEZ will take 59 drive links of 3/8 pitch chain. You cannot run .325 pitch chain unless both the drive sprocket and the bar sprocket are .325 pitch.
|
|
|
Post by rowdy235 on Aug 21, 2011 12:44:57 GMT -5
Oregon part number 29571 is the bar and chain combo (16" & 3/8") I used for my SEZ, it worked well.
|
|