|
Post by eajonesyk2 on Jun 26, 2011 20:02:46 GMT -5
I need a replacement chain for a homelite xl101. It has a 20 inch bar. The sprocket has 7 teeth. Can anyone provide the specs on the chain required for this saw. If oregon chain sells the loops, a part number for that would be especially helpful thanks.
I just pulled this saw out of the attic where is been resting for more than a couple of decades and it fired up and seems to run fine.
|
|
|
Post by MCS on Jun 26, 2011 21:59:03 GMT -5
Is there a chain at all with the saw? If so, count the number of drive links. When you say it has a 20" bar, are you measuring from the front the case to the tip of the bar? If it is a 20" cutting length bar then it would take a 70 drive link chain. You would get a 3/8 pitch .050 gauge chain with 70 drive links.
|
|