|
|
Post by yooper400 on Sept 19, 2010 13:52:19 GMT -5
I have both a homelite xl and 330 both need replacement fuel lines. What is the correct fuel line size? It looks to be 3/32" X 5/32" is this correct?
|
|
|
|
Post by mikem on Sept 19, 2010 17:04:04 GMT -5
Those two sizes sound correct. I find the easiest way is to remove and take the old fuel lines to the supplier, then you can get the right ID/OD and length. This is especially important if the fuel line exits the carb box or case somewhere and depends on the fit to seal. I use Tygon(yellow) and find it to be more durable.
|
|
|
|
Post by MCS on Sept 19, 2010 22:13:29 GMT -5
I don't know about the 330 but .177x.211 was use on a lot of Homelites.
|
|
|
|
Post by tribulation138 on Sept 22, 2010 18:38:24 GMT -5
i like the clear fuel hoses. Then I can see if the carb is taking fuel or not
|
|
|
|
Post by 925fetish on Sept 23, 2010 12:12:41 GMT -5
Good Ol' grey seems to be whats holding up to this rotton fuel we are getting.
|
|
|
|
Post by mikem on Sept 23, 2010 13:51:13 GMT -5
i like the clear fuel hoses. Then I can see if the carb is taking fuel or not Clear line ages and turns yellow so you might as well start w/ yellow. That grey line is good too. No-one around here carries it though. Only Tygon. |
|
