|
|
Post by 5runners on Apr 10, 2009 22:03:51 GMT -5
Does 20.00 and 25.00 for used 20'' bar, seem kinda high or is that a pretty fair price?
25.00 for a used Perma-Hard
20.00 for a laminated spocket tip
|
|
|
|
Post by MCS on Apr 10, 2009 22:51:24 GMT -5
The price can be spit between collector value and usable condition. If you are looking for a bar to put on a working saw then you have to weigh the used condition against the price of a new bar.
If you are looking for a show piece then you will pay more for obsolete bars than for a new one.
A nice 20" Perma Hard with good lettering could easily be worth the $25
Be careful of used sprocket tipped bars. Finding a replacement tip for a Homelite Power Tip is nearly impossible. Those sprockets do wear.
|
|
|
|
Post by redsqwrl on Apr 11, 2009 10:57:05 GMT -5
I needed (want) a 23" bar and 1/2 inch chain for a gear drive I am playing with.
the chain was $35 the rusty but new bar was $20.
I am going to cut with this saw and bar.
He had a primo No rust new homelite bar in 27" for $120 he still has that one.
I will shop around and find a show bar.
hope this helps.
|
|
|
|
Post by lawnmowertech37 on Sept 9, 2009 18:45:18 GMT -5
whats a good price for a Homelite hard tip 24" bar ?
GW-24001-D5
|
|
weimedog
Collector
Good Bye luke, the last Weime for me
Posts: 87 
|
Post by weimedog on Jan 18, 2010 11:43:28 GMT -5
I got one in "like new" condition, Homelite Logo and all; for $20 bucks..hard nose. For 1020 (C & Xp's) I will stick it on a gear drive for show..so 20-30 bucks is a good range. Depends on how much you need one.
|
|
