cm76
Collector
Posts: 85
|
Post by cm76 on Dec 29, 2009 17:54:43 GMT -5
Hi all, I have a 2000 Automatic which I have just started to strip down for a full going over. The saw is really dirty and has been sitting for a long time - at least it was under cover from the weather. The saw is missing quite a few bits and pieces as well as having some parts broken when I found it so it should be a good challenge to get it running again. This is my first Homelite saw project so I have got a couple of questions that the Homelite experts may be able to help me with. 1) How popular were these 2000 model saws in their day? I have not seen alot of media about this model of Homelite. 2) Were they a good saw ? Were they popular amongst the pro fallers ? How did these saws compare with McCulloch's etc ? It has been interesting to see the differences between this Homelite saw and the last saw I finished rebuilding (Mac SP125). The Homelite engineering and design is impressive and very compact. I will post some more pics during the strip down phase - I am hoping that the piston and cylinder are in good condition. That would be a bonus. Regards, Chris. Attachments:
|
|
|
Post by 925fetish on Dec 29, 2009 20:59:11 GMT -5
These saws are pro-saws,tough as nails.They don't turn many R's by today's standards,but they pull like a freight train,so with a good sharp chain they cut as fast as you can pull against the dogs. the harder the faster.
|
|
|
Post by aviatur on Dec 30, 2009 22:04:03 GMT -5
I agree with 925fetish. The one I have has a 42" bar with a .404 chain and in large oak you can not stall it out. I pulls like a D8 Cat. A little bit heavy by today's standards, but it will still be cutting when the new saws are in the junkyard.
|
|
hoss
Wud Cuttah
Posts: 46
|
Post by hoss on Dec 31, 2009 22:17:15 GMT -5
Yes to what both of my Homelite Bretheren said.
|
|
cm76
Collector
Posts: 85
|
Post by cm76 on Jan 1, 2010 1:10:24 GMT -5
Thanks for the information on the 2000. It makes me even more keen to get it up and running again.
The saw is missing its carb, and I was wondering what model is correct for this model saw?
Any help is greatly appreciated,
Chris.
|
|
|
Post by chainsawlady on Jan 1, 2010 2:34:43 GMT -5
Thanks for the information on the 2000. It makes me even more keen to get it up and running again. The saw is missing its carb, and I was wondering what model is correct for this model saw? Any help is greatly appreciated, Chris. Chris The Tillotson number for the carb. is HL-261A - Homelite number 65717. chain saw lady
|
|
cm76
Collector
Posts: 85
|
Post by cm76 on Jan 1, 2010 5:21:53 GMT -5
Thanks alot chainsawlady- much appreciated.
Regards,
Chris.
|
|