|
|
Post by OBR on Jan 5, 2008 13:25:42 GMT -5
Question: My SXL-AO is missing its entire ignition system (module, core the whole deal) and I was looking on ebay for an ignition that I could put on the saw and ran across an 'ignition chip' which the seller claims replaces the points and condenser. I should start by saying ignitions aren't exactly my forte and I was hoping someone could explain to me what all the 'chip' replaces, how it works, and if I could put it on my saw. Thanks all, Jared
|
|
|
|
Post by lawnmowertech37 on Jan 6, 2008 19:54:19 GMT -5
Question: My SXL-AO is missing its entire ignition system (module, core the whole deal) and I was looking on ebay for an ignition that I could put on the saw and ran across an 'ignition chip' which the seller claims replaces the points and condenser. I should start by saying ignitions aren't exactly my forte and I was hoping someone could explain to me what all the 'chip' replaces, how it works, and if I could put it on my saw. Thanks all, Jared hi jared i may have your parts you need sometimes them chips dont work besides i am cheaper than them folks on ebay are on them chips but anyway i may have your parts all i need to check it to make sure is your ut # calvin |
|
|
|
Post by OBR on Jan 6, 2008 20:37:56 GMT -5
I see, Calvin. sent you a PM about checking on parts.
|
|
|
|
Post by OBR on Jan 13, 2008 21:28:47 GMT -5
Just wanted everybody to know I am still looking for this part (p/n 94589AS) If anybody has one or knows someone who does please leave me a pm. A used one is fine as long as it is complete and working. Thanks all. - Jared
|
|
|
|
Post by lawnmowertech37 on Jan 22, 2008 15:09:18 GMT -5
Just wanted everybody to know I am still looking for this part (p/n 94589AS) If anybody has one or knows someone who does please leave me a pm. A used one is fine as long as it is complete and working. Thanks all. - Jared we have them on our store under the Homelite category under electrical parts |
|
|
|
Post by OBR on Jan 22, 2008 18:16:58 GMT -5
Yup got your pm Calvin, thanks.
Like I said over at AS if i can't find a used one I'll probably be hittin you up for and ignition and gasket.
-Jared
|
|
|
|
Post by OBR on Jan 22, 2008 18:24:49 GMT -5
Oh yeah on that note, does anybody know if ignition p/n A94605S will fit on my SXLAO which lists the ignition as p/n 94589AS. It appears to be the same set-up (module and core solid state) and ignition A94605S is also off of an SXLAO but p/ns are different as are flywheel p/ns. Or could I buy both the flywheel (as mine has wear on the backside as if it rubbed against a bolt) and ignition and have it work that way? Any help would be much appreciated. -Jared
|
|
