|
|
Post by wildman1024 on Oct 5, 2009 14:25:24 GMT -5
Hey guys, New here and this is my 1st post. I recently acquired a C-9 and after working on that and the feel/sound of it I had to have more. I recently picked up a XP series and am unsure of the model (missing Tag). Anyways I have it stripped down now and am gonna need some parts like crank bearings and seals, gaskets and some other stuff. Any and all help would be greatly appreciated. Here is a link to the pics. s570.photobucket.com/albums/ss144/Wildman1988/Homelite%20XP/ |
|
|
|
Post by lesorubcheek on Oct 5, 2009 20:36:57 GMT -5
Hello and welcome!
Assuming the flywheel is original, its not a XP-1000, since they used the over-running bearing deal like on the C-x1 saws. Since it doesn't have an auto oiler, my bet is its XP-1020. There was also an XP-1020 auto that came with an auto oiler. Any case, it looks like a very fun project.
Congrats!
Dan
|
|
|
|
Post by wildman1024 on Oct 6, 2009 4:22:11 GMT -5
Thanks for the help. It should be a great project and I'm gonna have some parts left over for sale when I am done. I was able to find a ton of NOS parts and am gonna pretty much build a new saw using the guts from this saw. I'll post more pics when it starts coming together. Waiting on parts.
I still need crank bearings/seals, and gaskets for the case's
|
|
|
|
Post by lesorubcheek on Oct 6, 2009 7:55:59 GMT -5
Calvin may help be able to help ya out. If not, Kyle at Edge & Engine is another choice. Pretty sure I saw the 63043 clutch-side bearings at his online store. I bet between Calvin and Kyle, you'll get fixed up.
Dan
|
|
|
|
Post by wildman1024 on Oct 6, 2009 14:05:41 GMT -5
Where do I find the IPL for the Xp series saws to look up some parts?
|
|
