|
Post by ibmike on Apr 29, 2024 7:34:16 GMT -5
Rebuilt the carburetor yesterday pressure test to 6 lbs leak down very very slow, so i went with it. Starts with the trigger lock on (compression release open) revs up than down up and down when i pull the trigger it dies. Gone over everything, new fuel filter and line ,flushed tank ,new spark plug.
|
|
okie
Saw Builder
![*](//storage.proboards.com/forum/images/stars/star.png) ![*](//storage.proboards.com/forum/images/stars/star.png)
Posts: 203
|
Post by okie on Apr 30, 2024 19:59:18 GMT -5
Will it slow idle good for long period of time? (without the chain running)
|
|
|
Post by ibmike on May 1, 2024 5:43:30 GMT -5
It runs up and down than i release the trigger lock and it dies.
|
|
okie
Saw Builder
![*](//storage.proboards.com/forum/images/stars/star.png) ![*](//storage.proboards.com/forum/images/stars/star.png)
Posts: 203
|
Post by okie on May 1, 2024 8:15:08 GMT -5
It runs up and down than i release the trigger lock and it dies. Appears it will not idle. We assume you have adjusted the carb idle adjust JET to 1 1/2 -2 turns out and the fast idle carb screw is set in for fast low idle. Also set the H jet out 1 1/2 turns If so to the carb settings you need to do a vac/pressure test. If that is ok try subbing a know good carb or another carb.
|
|