|
Post by smiles on Sept 19, 2023 21:48:41 GMT -5
I have a 1979 Super 2 that does not seem to have spark. From what I can tell with my multimeter the points and condenser are both working properly. When I test the coil with the kill switch unplugged, here is what I get: Tab (where the condenser and kill switch attach) to core: 0.8ohm Tab to plug wire: 8.34kohm Tab to ground: 0ohm. Should the tab be grounded with the kill switch unplugged, or is it shorted internally? I also have an xl2 that I haven't tried to start, but the coil readings are similar. Thanks! imgur.com/a/HYHYeH7
|
|
|
Post by undee70ss on Sept 21, 2023 23:30:58 GMT -5
Those reading are about normal. Most likely its the points or condenser. If you have a better quality meter the condenser can be tested. ( m ferads)
|
|