|
|
Post by polardoo on Jul 24, 2009 17:43:48 GMT -5
Hey there all. I just picked up a pawned 350. It runs very well and seems to need more than the 16" bar thats on it. The question I have is the air filter doesnt seal to the carb. When I look at an IPL I see a flange maybe? The carb looks clean like it was just kitted and maybe a piece got left out.
Does anyone have a description for me or a pic? Im also going to need rubber isolaters for it. Thanks
|
|
|
|
Post by lesorubcheek on Jul 25, 2009 8:34:36 GMT -5
Yes, there's a flange that sits on top of the carb that the air filter should seal on. Its part #12109-1 and called a "bushing - flange". Its just a thin metal tube that's flared on one end to hold it in place.
Dan
|
|
|
|
Post by polardoo on Jul 25, 2009 10:46:31 GMT -5
Okay In looking at the IPL I think maybe there are two styles and two different air filters and what I have is mixed up. So Im thinking a short piece of copper tubing. Thanks for the info
|
|
|
|
Post by lesorubcheek on Jul 25, 2009 11:49:11 GMT -5
Here's the page from a 350 IPL that shows the little tube. Its item 23 in the list. Maybe this helps.  Dan |
|
|
|
Post by chainsawlady on Jul 25, 2009 12:50:57 GMT -5
Hey there all. I just picked up a pawned 350. It runs very well and seems to need more than the 16" bar thats on it. The question I have is the air filter doesnt seal to the carb. When I look at an IPL I see a flange maybe? The carb looks clean like it was just kitted and maybe a piece got left out. Does anyone have a description for me or a pic? Im also going to need rubber isolaters for it. Thanks polardoo I have the flange #12109-1 and a set of isolators (4) A-70623 for the 350. I interested, I will PM you the price. chainsawlady |
|
