|
Post by edju1958 on Dec 14, 2022 17:48:15 GMT -5
I've got this relatively new looking XL that I can't seem to find out what throttle handle cover it takes.There's no UT,Lot #,or Serial # anywhere on the saw.It's a double trigger with a rocker switch.The measurements of the handle cover are 10 in.on center from screw to screw (it uses 2 screws to hold the cover on),& total length of the cover is 11 3/8 in.Here's a pic.
|
|
|
Post by blythkd on Dec 14, 2022 19:57:00 GMT -5
Looks like the pn 02495 handle cover. That's the style of XL that's in the same IPL with the 180, 192, 200 and Super 2.
|
|
|
Post by edju1958 on Dec 15, 2022 19:41:07 GMT -5
I've been trying to find the correct handle cover for the better part of a yr.now.Last winter someone here gave me the wrong part #.I've got one coming from Buford Parrish.This saw is practically new.
|
|
|
Post by blythkd on Dec 15, 2022 22:49:17 GMT -5
I did a net search and didn't come up with one. Doesn't seem like those handle covers grow on trees. If you don't come up with one and I don't have a new one, I think I can come up with a used one.
|
|
|
Post by edju1958 on Dec 15, 2022 23:08:19 GMT -5
I guess you didn't read my post Brent.I said I got one coming from Buford Parrish in Ky.He told me he has about 50 of 'em.Plenty of 'em on feebay too.
|
|
|
Post by blythkd on Dec 15, 2022 23:37:15 GMT -5
Yeah I read it. I just meant if you get it and it's not the right one, I'll look for one.
|
|
|
Post by 5terrysupersaws on Dec 16, 2022 17:33:57 GMT -5
|
|
|
Post by edju1958 on Dec 16, 2022 19:46:37 GMT -5
Like I said,I ordered that part last yr.& when I got it it was the wrong handle cover.The seller most likely sent me the wrong part.
|
|