|
Post by John r on Jun 27, 2022 9:52:28 GMT -5
Can seem to get the oiler for the bar to pump oil. Have replaced all the gaskets as well as the pump. I’ve checked for a blockage and all the passages are clear. If I put a slight pressure to the oil tank oil will flow out of the lube hole for the chain yet the system will not operate when the saw is running. It’s been to several repair shops as well with no positive result. Has anyone had this issue and is able to help?
|
|
|
Post by blythkd on Jun 27, 2022 11:16:24 GMT -5
We'll need to know which model saw you have.
Edit: 150?
|
|