|
Post by lesorubcheek on Jul 10, 2009 12:54:56 GMT -5
May have asked this question awhile back, but not sure. Getting older and the brain is starting to show it more and more each day. Anyway, I finally have a grip on what's unique between a 2100, 2100S (Standard) and a Super 2100.
I don't have a good understanding though of the 2000 series. According to various sources, there's at least the following variations:
2000 2000-E 2000-P Super 2000
Now I do have an IPL for the 2000, so at least that's a starting point.
Making a guess that the -E is for an East coast version (flush cut handles and maybe smaller dawgs), but that's just a guess.
Anybody have information about what makes these versions unique? Just trying to solve another of the little mysteries of the universe.
Thanks, Dan
|
|
|
Post by OBR on Jul 10, 2009 19:21:03 GMT -5
P for pacific? Full wrap and bigger dawgs? I don't know... haha
|
|
|
Post by lesorubcheek on Jul 10, 2009 20:47:49 GMT -5
P for pacific? Full wrap and bigger dawgs? I don't know... haha That sounds better than anything I can guess. Don't think I've noticed a "P" designation on any other Homelites. Somebody here has gotta know about these. Dan
|
|
|
Post by redsqwrl on Jul 10, 2009 21:39:24 GMT -5
When I inquired with saw king over one his larger 2k series saws he stood firm on the S=super
I did not bid on the saw because the acres site or the Blog at alains states as you did S = standard.
this is a subject I am afraid I Got nuthin but am intriqued by.
RS
|
|
|
Post by lesorubcheek on Jul 10, 2009 22:03:57 GMT -5
I'll back Alains on that. The 2100 S (Standard) is named such because it uses 2 "standard" rings. The Super 2100 has thin rings and the "plain" 2100 has a single Dykes or head-land ring. Unless Homelite IPLS are printed wrong, I'm 100% sure on these.
Dan
|
|
|
Post by MCS on Jul 10, 2009 23:10:21 GMT -5
Wow, that even makes sense ;D
|
|
|
Post by billg on Jul 11, 2009 3:29:16 GMT -5
I thought I posted a picture of the 3 piston ring styles for the 2100 . I guess I was wrong. The pistons were replaced as the saws were worn. They can have any of the three types. Bill
|
|
|
Post by billg on Jul 11, 2009 3:32:25 GMT -5
As for the 2000 they did not have a splined crank and clutch.
Bill
|
|
|
Post by mikevan on Jul 11, 2009 5:02:22 GMT -5
I don't think they'd use E to designate one coast and not W [west] for the other? Maybe E for electronic? P for points? Just a guess.
|
|
|
Post by lesorubcheek on Jul 11, 2009 13:15:46 GMT -5
I thought I posted a picture of the 3 piston ring styles for the 2100 . I guess I was wrong. The pistons were replaced as the saws were worn. They can have any of the three types. Bill You posted 'em earlier Bill. Why do you think you didn't? Dan
|
|
|
Post by lesorubcheek on Jul 11, 2009 13:18:43 GMT -5
I don't think they'd use E to designate one coast and not W [west] for the other? Maybe E for electronic? P for points? Just a guess. Sound like a reasonable guess to me. Its kinda hard to imagine they would have introduced and electronic ignition on the 2000 and then not offer it on the 2100 series that followed, but then again anything is possible. I do know that the "E" has been used for East coast on a few models. The 750, and 150 just to name a couple. That's why I won't be surprised if that's what the "E" is for, but then again, it may very well be something different in regards to the 2000. Dan
|
|
|
Post by lesorubcheek on Jul 11, 2009 13:23:21 GMT -5
As for the 2000 they did not have a splined crank and clutch. Bill Sounds right, and the 2100 didn't either. Only the 2100S and the Super 2100 used the splined crank, that is unless Homelite printed an incorrect IPL. Dan
|
|
|
Post by cbfarmall on Jul 11, 2009 14:03:31 GMT -5
I do know that the "E" has been used for East coast on a few models. The 750, and 150 just to name a couple. Pray tell, what does the west coast 150 look like? Climbing saw with large dogs and a full wrap. Or is that a typo. Chris B.
|
|
|
Post by lesorubcheek on Jul 11, 2009 15:17:32 GMT -5
I do know that the "E" has been used for East coast on a few models. The 750, and 150 just to name a couple. Pray tell, what does the west coast 150 look like? Climbing saw with large dogs and a full wrap. Or is that a typo. Chris B. Actually, there's a 150, and a 150E. The E has a padded rubber handle grip and a padded front handle as well. Don't ask me why they designated it as an "E"but that's the difference. There was a variation of using a heat shield over the muffler that may have been intended for one area or another possibly due to some regulations, but I'm not sure of any details, just of the variations. Dan
|
|
|
Post by MCS on Jul 11, 2009 16:03:07 GMT -5
Actually, there's a 150, and a 150E. The E has a padded rubber handle grip and a padded front handle as well. Don't ask me why they designated it as an "E"but that's the difference. There was a variation of using a heat shield over the muffler that may have been intended for one area or another possibly due to some regulations, but I'm not sure of any details, just of the variations. Dan It's the Executive Model There is also the 150-W which has some changes in the exhaust area.
|
|
|
Post by lesorubcheek on Jul 11, 2009 16:40:31 GMT -5
Actually, there's a 150, and a 150E. The E has a padded rubber handle grip and a padded front handle as well. Don't ask me why they designated it as an "E"but that's the difference. There was a variation of using a heat shield over the muffler that may have been intended for one area or another possibly due to some regulations, but I'm not sure of any details, just of the variations. Dan It's the Executive Model There is also the 150-W which has some changes in the exhaust area. Yea, I was thinking it maybe was designated as a "W", but I wasn't sure and didn't have books handy. I just remembered there was a variation in the muffler and a shield added over it also. Again, why Homelite did this I have no clue, but the "E' was for East as is "W' is as far as I know, always for West. Dan
|
|
|
Post by cbfarmall on Jul 11, 2009 17:12:53 GMT -5
Sorry about that. Since you were talking about East/West coast stuff, it seemed funny.
Chris B.
|
|
|
Post by lesorubcheek on Jul 11, 2009 18:39:34 GMT -5
Don't be sorry Chris... It is pretty funny when you normally think about West coast vs. East coast meaning full wraps and big spike vs. flush cut and smaller spikes. Homelite musta had their reasons for the naming conventions, even though there are many inconsistencies. Yep. I can imagine a little 150 with its 16" buried in some of the big trees.....
Dan
|
|
|
Post by RandyMac on Jul 12, 2009 17:47:04 GMT -5
A Westy chainsaw I can imagine a little chainsaw in a bigger tree
|
|
|
Post by billg on Jul 13, 2009 2:48:45 GMT -5
I do love the ole West coast pics.
Bill
|
|