|
Post by oldwoodsplitter on May 16, 2022 23:00:18 GMT -5
Does anyone know a source for a bar for a C-51? What would the Oregon model number be for a 24 or 30 inch bar? I can’t find a model number on Oregon’s website
|
|
|
Post by undee70ss on May 16, 2022 23:47:32 GMT -5
Bars for those have not been in production for many years.
|
|
|
Post by oldwoodsplitter on May 17, 2022 12:11:54 GMT -5
There’s one for sale by me but the bar is only 16 inches
|
|
|
Post by undee70ss on May 17, 2022 15:27:21 GMT -5
You could use a Husqvarna large mount bar and modify it to fit your saw
|
|
|
Post by oldwoodsplitter on May 17, 2022 20:41:43 GMT -5
Which bar and what drive link chain would I use with it?
|
|
|
Post by oldwoodsplitter on May 17, 2022 21:01:08 GMT -5
Would a D007 or D009 be close enough?
|
|
|
Post by undee70ss on May 17, 2022 21:37:58 GMT -5
D009, you have to use the husky drive link count.
|
|
|
Post by oldwoodsplitter on May 17, 2022 21:54:53 GMT -5
So that would be 84 instead of 81 for a 24 inch bar?
|
|
|
Post by oldwoodsplitter on May 17, 2022 22:08:47 GMT -5
Oregon 243ATMD009 Bar with a 76 drive link chain? Looks like you just have to widen out the slot 3/8 inch
|
|
|
Post by undee70ss on May 17, 2022 23:14:28 GMT -5
Looks like you just have to widen out the slot 3/8 inch Correct
|
|