kkj
Groundie
Posts: 8
|
Post by kkj on Feb 28, 2022 7:48:07 GMT -5
Model: Super 2 SL
The threaded rod that is holding the bar to the saw body with nut is bad. Not many treads left. So it has to be changed. Is it screwed in to the body? Can it be removed? What kind if thread has it?
What kind treads are there on the chain saw. I guess it is not metric. Must be Whitworth, UNC, or UNF?
|
|
|
Post by blythkd on Feb 28, 2022 8:11:47 GMT -5
Should be 1/4-20 UNF thread. The engine has to be removed from the case and the stud drives back through the bar mount pad. It has a large square head on the back side.
|
|