|
|
Post by cbfarmall on Jun 18, 2009 9:58:40 GMT -5
What are you fellas doing for these NLA seals? Part nos. 53444 and 12306. I'm going to take them to a bearing shop soon but I was wondering if someone here has any insight.
Chris B.
|
|
|
|
Post by lesorubcheek on Jun 18, 2009 14:54:39 GMT -5
I'm anxiously looking at replies to this question. I've been lucky (so far), but I see the day coming when I'm gonna be asking the same thing. I read your AS thread and there were some good suggestions. Again, great topic!
Dan
|
|
|
|
Post by cbfarmall on Jun 18, 2009 18:50:14 GMT -5
I'm anxiously looking at replies to this question. I've been lucky (so far), but I see the day coming when I'm gonna be asking the same thing. I read your AS thread and there were some good suggestions. Again, great topic! Dan Crap, this reply does nothing to boost my confidence! If and when I get parts, I'll let you know. Chris B. |
|
|
|
Post by lesorubcheek on Jun 19, 2009 7:00:36 GMT -5
Crap, this reply does nothing to boost my confidence! If and when I get parts, I'll let you know. Chris B. Sorry 'bout that Chris ;D. Wish I could offer some suggestions. Dan |
|
|
|
Post by cbfarmall on Jun 21, 2009 20:22:15 GMT -5
Still haven't gotten to the bearing shop. Hard to do working midnights. Fortunately, I was digging through my 2100/3100G parts and found a pair of seals 12306 and 53444. I always figured they were for the older saws but I now know differently. That makes 1 12306 and 2 53444. I have a line on another 12306. I do still intend to get to the bearing shop and try to match them up to National numbers.
Chris B.
|
|
cjcocn
Collector wannabe
Posts: 17 
|
Post by cjcocn on Jun 21, 2009 21:21:49 GMT -5
I just picked up a box of Homelite parts and I thought I saw a seal or two in there. Do you have measurements for that seal?
Also, who are the Homelite gurus? I need some help identifying some of the parts.
From memory:
2 connecting rods
1 or 3 sets of rings
air filters (they are just the fabric - not really any plastic on them
clutches
rewind springs
muffler halves
1 complete muffler
small springs
not-so-small springs (look like starter pawl springs)
homelite carbs
carb kits
a top handle
a bunch of thick looking gaskets
a bunch of odd looking gaskets
other parts that I cannot recall.
Should I take pics and post them up?
I got these as part of a "take it all" deal and want to sell them, but first I need to know which saws they belong to.
|
|
|
|
Post by MCS on Jun 21, 2009 22:21:45 GMT -5
A picture of the parts would at least be a start. We can weed out the easy ones and then tackle what's left. Start a new thread in NOS parts
|
|
|
|
Post by lesorubcheek on Jun 22, 2009 8:38:08 GMT -5
Yes, what A7 said. And for the rods and rings, dimensions would help also. The carbs should have numbers on them that won't hurt in looing them up.
Dan
|
|
|
|
Post by cbfarmall on Jun 22, 2009 9:45:32 GMT -5
Oh boy, I can see Bill gearing up to get a look at those clutches.
Anyway, I took the seals in to the bearing shop. I may hear back from them later today.
Chris B.
|
|
|
|
Post by cbfarmall on Jul 1, 2009 12:35:03 GMT -5
Well, got a call back a few days ago. They can't seem to cross these seals to anything. Only match they got was to a hydraulic cylinder wiper seal with no garter spring so that's out. At least I have 2 NOS pairs. I won't be swapping them out willy-nilly.
Chris B.
|
|
|
|
Post by lesorubcheek on Jul 1, 2009 12:40:43 GMT -5
That sux.  You'd think that somewhere these seals would be available. Dan |
|
