|
|
Post by blazer296 on Jun 9, 2009 13:44:44 GMT -5
I need a 24-36" bar for a C-71 bad, thought I found a 30" but  it fell through. I don't care if its roller tipped, OEM, aftermarket, ect. If it fits my saw, is 24-36" and new or close to it, I'll take it. Unless it costs a couple million $$ that is. If anyone has one or knows where I might get one, please, let me know. Thanks, Jim |
|
|
|
Post by billg on Jun 10, 2009 1:01:55 GMT -5
Well finding a roller nose is darn near impossible. So is a sprocket nose. Hard noses are found easier but even then they are tough to get on that length.
Bill
|
|
|
|
Post by blazer296 on Jun 10, 2009 3:29:21 GMT -5
I've noticed they are hard to find. I found a place that listed a 30" gb, but when I called they said GB was bought out. They can't get them anymore, but someone might have one in stock "somewhere" if I can find them.
Thanks for the reply, guess I'll keep looking.
Jim
|
|
|
|
Post by chainsawlady on Jun 10, 2009 19:13:55 GMT -5
blazer296
I have 6 - 32" Hard nose bars that will fit the C-series. Some have the oil hole all the way through and will also fit the gear saws.
2 - GW-32003 -Al with Homelite perma hard tip on the bar
3 - 17750 - Oregon supertronic
1 - 33186 - Oregon direct drive only - silver bar.
If interested, let me know.
chain saw lady
|
|
|
|
Post by hawtsawz on Jun 10, 2009 19:43:42 GMT -5
Chainsawlady,
I would be interested in purchasing 1 of the Homelite perma hard tip bars GW-3200-A1 for my 2100-S if you would PM me ;D
Thanks!
hawtsawz
|
|
|
|
Post by blazer296 on Jun 11, 2009 1:19:14 GMT -5
Chainsawlady,
Shoot me a price for those, along w/ more details, I definately want one( or 2 if I may). Never hurts to have a spare. What chain are they for, and are they NOS, lightly used, or well used ?My c-71 is direct drive, w/ 404 .063 chain. That 33186 sounds good, and maybe one of the others for a backup.
I have been looking for a bar for some time, you are a lifesaver, thanks.
I'll be looking forward to hearing from you.
Thanks again,
Jim
|
|
|
|
Post by blazer296 on Jun 14, 2009 2:52:38 GMT -5
Got two of those bars from Chainsawlady yesterday, awesome ship time, even though I only live a state over. I would definitely recommend her if she has the parts you need. It is good to see honest, helpful people doing what they can.
Thanks again Chainsawlady,
Jim
|
|
