|
|
Post by homelite1980 on Apr 6, 2021 14:49:59 GMT -5
Hi All,
I have a SXL922 and looking for the crank case tank assembly
P/N A-68023-A or seeing if anyone has split a tank and cleaned the inside that had corrosion. I’m doing a full restoration and this is the biggest problem I’ve had so far. The corrosion is pretty bad and I cleaned many times with washers and acetone but no help. Open to any suggestions.
Cheers,
Brian
|
|
|
|
Post by kevinm1980 on Apr 6, 2021 19:45:20 GMT -5
Are you in Canada? Have a parts saw I can part with tank is clean, it actually runs but only has 140psi compression
|
|
|
|
Post by homelite1980 on Apr 7, 2021 22:30:58 GMT -5
How much for the saw I’m interested
I live in the US but would pay the shipping
|
|
|
|
Post by kevin1980 on Apr 8, 2021 6:53:10 GMT -5
I'd do 90 Canadian for saw, problem shipping will be killer last saw I sent to the states cost 57 Canadian
|
|
|
|
Post by kevinm1980 on Apr 8, 2021 8:03:37 GMT -5
Shipping accross the boarder always sucks
|
|
|
|
Post by homelite1980 on Apr 8, 2021 16:19:16 GMT -5
That’s fine with me I’ve had 4 saws shipped from Canada
|
|
|
|
Post by homelite1980 on Apr 8, 2021 16:19:56 GMT -5
My zip code is 05753 so you can check shipping
|
|
|
|
Post by homelite1980 on Apr 10, 2021 19:44:01 GMT -5
Does anyone know of a homelite SXL 925 case tank assembly will work on a Homelite SXL 922
|
|
|
|
Post by rarefish383 on Apr 12, 2021 17:40:58 GMT -5
Cost me $474 US to send a 7-29 with a 52" bar to Australia, and that was close to ten years ago.
|
|
|
|
Post by homelite1980 on Apr 15, 2021 13:15:30 GMT -5
My SXL 922 was shipped from Canada and was $52
|
|
|
|
Post by homelite1980 on Apr 25, 2021 21:27:27 GMT -5
Does anyone know of or have a full wrap handle for a SXL 922 or
SXL 925 or if you know of someone who builds them.
|
|
